Cisco Akademia

1. What application layer protocol is commonly used to support for file transfers between a client and a server?
• HTML
• HTTP
• FTP
• Telnet

2. What are two forms of application layer software? (Choose two.)
• applications
• dialogs
• requests
• services
• syntax

3. A network administrator is designing a network for a new branch office of twenty-five users. What are the advantages of using a client-server model? (Choose two.)
• centralized administration
• does not require specialized software
• security is easier to enforce
• lower cost implementation
• provides a single point of failure

4. What is the purpose of resource records in DNS?
• temporarily holds resolved entries
• used by the server to resolve names
• sent by the client to during a query
• passes authentication information between the server and client

5. What is the automated service that matches resource names with the required IP address?
• HTTP
• SSH
• FQDN
• DNS
• Telnet
• SMTP

6. What three protocols operate at the Application layer of the OSI model? (Choose three.)
• ARP
• DNS
• PPP
• SMTP
• POP
• ICMP

7. What are three properties of peer-to-peer applications? (Choose three.)
• acts as both a client and server within the same communication.
• requires centralized account administration.
• hybrid mode includes a centralized directory of files.
• can be used in client-server networks.
• requires a direct physical connection between devices.
• centralized authentication is required.

8. Which application layer protocols correctly match a corresponding function? (Choose two.)
• DNS dynamically allocates IP addresses to hosts
• HTTP transfers data from a web server to a client
• POP delivers email from the client to the server email server
• SMTP supports file sharing
• Telnet provides a virtual connection for remote access

9. Which email components are used to forward mail between servers? (Choose two.)
• MDA
• IMAP
• MTA
• POP
• SMTP
• MUA

10. As compared to SSH, what is the primary disadvantage of telnet?
• not widely available
• does not support encryption
• consumes more network bandwidth
• does not support authentication

11. Which statements are correct concerning the role of the MTA in handling email? (Choose three.)
• routes email to the MDA on other servers
• receives email from the client's MUA
• receives email via the POP3 protocol
• passes email to the MDA for final delivery
• uses SMTP to route email between servers
• delivers email to clients via the POP3 protocol

12. Which two protocols are used to control the transfer of web resources from a web server to a client browser? (Choose two.)
• ASP
• FTP
•HTML
• HTTP
• HTTPS
• IP

13. A small home network has been installed to interconnect three computers together for gaming and file sharing. What two properties represent this network type? (Choose two.)
• User accounts are centralized.
• Security is difficult to enforce.
• Specialized operating system software is required.
• File permissions are controlled by a single computer.
• A computer that responds to a file sharing request is functioning as a server.

14. Which layer of the OSI model supplies services that allow user to interface with the network?
• physical
• session
• network
• presentation
• application
• transport

15. Refer to the exhibit. What is the destination port for the communication that is represented on line 5?
• 80
• 1261
• 15533
• 3912
• 65520

16. What are two characteristics of peer-to-peer networks? (Choose two.)
• scalable
• one way data flow
• decentralized resources
• centralized user accounts
• resource sharing without a dedicated server

17. What application layer protocol describes the services that are used for file sharing in Microsoft networks?
• DHCP
• DNS
• SMB
• SMTP
• Telnet

18. What are two characteristics of clients in data networks? (Choose two.)
• use daemons
• initiate data exchanges
• are repositories of data
• may upload data to servers
• listen for requests from servers

19. What is the role of the OSI application layer?
• provides segmentation of data
• provides encryption and conversion of data
• provides the interface between the applications on either end of the network
• provides control of all the data flowing between the source and destination devices

20. How does the application layer on a server usually process multiple client request for services?
• ceases all connections to the service
• denies multiple connections to a single daemon
• suspends the current connection to allow the new connection
• uses support from lower layer functions to distinguish between connections to the service

Options With Highlight Colours are Correct Answer

1. Which of the following descriptions are true regarding the management connections on a Cisco router? (Choose three.)

• They are non-network connections.
• They are used to connect the router to the rest of the production network.
• They are synchronous serial ports.
• They are used for initial router configuration.
• They are asynchronous serial ports.
• They are accessed using their assigned IP address.

2. The console port can be used for which of the following? (Choose three.)
• debugging.
• password recovery.
• routing data between networks.
• troubleshooting.
• connecting one router to another.

3. Which of the following describes the function of a WAN?
• connects peripherals in a single location.
• connects multiple networks in a single building.
• provides connectivity on a LAN.
• provides connectivity over a large geographic area.

4. An internetwork must include which of the following? (Choose three.)
• switching.
• static addressing.
• IETF standardization.
• dynamic or static routing.
• consistent end-to-end addressing.

5. ABC Company just purchased three new routers to start their company network. Which items are needed to establish a terminal session between a PC and the router for the initial configuration? (Choose three.)
• straight-through cable.
• terminal emulation software.
• rollover cable.
• RJ-45 to DB-9 connector.
• V.35 cable.

6.Terminal emulation software, such as HyperTerminal, can be used to configure a router. Which of the following HyperTerminal options shown in the graphic are correctly set to allow configuration of a Cisco router? (Choose three.)
• bits per second.
• data bits.
• parity.
• stop bits.
• flow control.

7. Which of the following devices are used in the construction of a WAN? (Choose three.)
• hubs.
• routers.
• communication servers.
• transceivers.
• modems.
• multi-port repeaters.

8. Which of the following are functions of RAM? (Choose three.)
• contains startup configuration file.
• stores routing table.
• holds fast switching cache.
• retains contents when power is removed.
• stores running configuration file.

9. Why is a console connection to a router or switch preferred when troubleshooting? (Choose two.)
• can be accessed remotely.
• does not depend on network services.
• displays startup and error messages by default.
• does not require special components.

10. Which basic components do a router and a standard desktop PC have in common? (Choose three.)
• CPU.
• hard drive.
• input/output interfaces.
• keyboard.
• monitor.
• system bus.

11. During the initial configuration of a 2600 series Cisco router, which cable is required for connecting a PC to the console port?
• twisted.
• crossover.
• rollover.
• straight.

12. A router is composed of many internal components. Which of the following components stores a copy of the router's configuration file?
• metal-oxide memory.
• read only memory.
• flash memory.
• non-volatile random access memory.

13. What contains the instructions that a router uses to control the flow of traffic through its interfaces?
• packet configuration.
• configuration files.
• flash memory.
• internal components.

14. Several Ethernet hosts on a LAN need the gateway services of a Cisco 2500 series router. Which of the following would be needed to physically connect a router to all of the hosts on the LAN? (Choose two.)
• a crossover cable between the transceiver on a router and a switch.
• a crossover cables between a switch and hosts on a LAN.
• a straight-through cable between the auxiliary port on a router and a switch.
• a rollover cable between the console port on a router and a switch.
• straight-through cables between a switch and hosts on a LAN.
• a straight-through cable between the transceiver on a router and a switch.

15. Which router component holds the configuration file when power is lost?
• volatile random access memory.
• read only memory.
• non-volatile random access memory.
• flash memory.

16. Which of the following layers of the OSI model are incorporated in WAN standards? (Choose two.)
•physical layer.
• application layer.
• transport layer.
• data link layer.
• session layer.

17. Which of the following are true regarding router interfaces? (Choose three.)
• provide temporary memory for the router configuration files.
• connect the router to the network for packet entry and exit.
• can be on the motherboard or a separate module.
• hold the IOS image.
• connect the router to LANs and WANs.

18. Which of the following tasks can be accomplished through a management connection on a router? (Choose three.)
• troubleshooting problems.
• monitoring the system.
• capturing LAN data packets.
• configuring the router.
• routing data packets.

19. What do routers use to select the best path for outgoing data packets?
• ARP tables.
• bridging tables.
• routing tables.
• switching tables.

20. Which of the following are functions of NVRAM? (Choose two.)
• stores the routing table.
• retains contents when power is removed.
• stores the startup configuration file.
• contains the running configuration file.
• stores the ARP table.

21. Select the statements that correctly describe flash memory in a 2600 series router? (Choose two.)
• holds the startup configuration by default.
• can be upgraded with single in-line memory modules.
• stores Cisco IOS software images.
• stores routing table information by default.
• maintains the only copy of an IOS image after the router is booted.